1.設備介紹Equipment Description
此生產線是將乙烯與辛烯高分子材料等密煉聚合，再由混煉型塑機一次擠出成型的TPO防水卷材設備。
PE resins and high polymer materials are extruded into membranes with this equipment. The products perform well in high-strength, low-temperature flexibility , anti-aging and the chemical corrosion-resistant, it is top-quality polymer waterproof membrane.
3.技術參數 Technical Parameter
主機均采用先進變速技術，節電達30%
Host adopt advanced Trans-mission Technology, can save
electricity up to 30%.
自動加熱系統均采取厚模電路，節電達40%左右。
Automatic heating system had taken thick-circuit,saving electricity about 40%.
混合密煉機LZ500L加熱功率：8KW 雙速電機功率：40KW/32KW
配備全套上料裝置 功率：3.3KW
Mixer machine: Model isLZ500L.
Heating power is 8 KW.
Two-speed motor Power is 40KW/32KW. Complete with feeding device,power is 3.3KW.
2.擠出機SJ80 錐形雙螺桿減速機SJSZ80主電機功率：75KW(變頻調速)
Extruder SJ80 Conical twin-screw reducer SJSZ80 Host motor power is 75 KW(VVVF).
3.料筒 采用38CYMOALA材料，進行氮化處理加熱功率：47KW
Extruder barrel can be used 38CYMOALA materials with nitriding treatment. Heating power of screw is 47KW
4.模具 內式加熱 功率：34KW
Die can be with inner heating system,power is 34KW.
5.三輥機 輥筒表面為硬鉻處理 功率：3KW(變頻調速)
The surface of Three-Roller Device was with hard chrome treatment. Power is 3KW. (VVVF)
6.牽引機 采用力距牽引 功率：16N
Traction Device can be used Torque Traction. Power is 16N.
7.卷取機 磨擦收卷，帶計數自動器及定長報警裝置功率：1.1KW
Winding Unit is adopted friction winder with auto counters and length alarm device.Power is 1.1KW.
★產品說明Products Description
單層及復合TPO防水卷材 加筋TPO防水卷材
Single Layer TPO Waterproof Membranes
Reinforced TPO Waterproof Membranes
熱塑性聚烯烴類（TPO）防水卷材是一種以乙烯樹脂為基料，采用先進聚合技術和特定配方制成的片狀熱橡塑彈性防水材料，是近幾年在美國和歐洲盛行的一種新材料，配料中不含增塑劑，不存在增塑劑遷移而變脆。具有拉伸強度大、耐穿性好，抗紫外線強，表面光滑、高反射率且耐污染等綜合特點。易加工，可焊接、施工方便，完全回收，綠色環保的新型防水材料。
The Thermoplastice Polyolefin (TPO) waterproof membranes are the most popular waterproof materials in the world at present. It’s thermoplastic elastomeric waterproof materials by adopting advanced polymerization together with squeeze technology,which perform well in mechanical properties, high tensile strength,oxidation-resistance and resistance to puncture.
★ 產品規格Products Specification
長度：≥20米 寬度： 2.1米 厚度： 0.5-2.0mm
Length:≥20m width: 2.1m Thickness: 0.5-2.0mm
★ 施工方法Installation
TPO卷材防水系統的搭接應為熱風焊接。一般采用粘結法、空鋪法、機械固定法三種方法。
★ 產品應用范圍Application Range
可廣泛應用于屋面、地下室、地鐵、堤壩、水利、隧道及鋼結構屋面、大型超市及大型廠房的永久性防水工程。
Products form waterproof layers in roof ,basement, steel structure roofing,big market,large workshop,etc.
|
|
